Salinity Monitoring Equipment

Mounting	Wall-mounted
Display	LC graphic display, light blue backlit, 128x168 pixels resolution
Sensor Monitor	Direct display and verification of measured sensor values
Units of Measure	ppm, mS/cm
Range	0.5 mS/cm – 200 ms/cm
​Capacity	Up to 4 conductivity sensors
​Output	2 Digital Outputs - 2 Analog Outputs
​Mounting Dimensions	7 ½” H X 7 ¼” W X 6 ¾” D
​Housing Protection Rating	IP65
Housing Material	PA 66
Power Requirements	110 VAC, 1.2 AMP
​Weight	5.2 lbs
Memory Card	SD or SDHC (8 MB max)
Expansions*	pH, Flow, Temperature
​Ethernet Module*	Modbus TCP, PROFINET Conformance Class B and EtherNet/IP

*Optional - must be purchased with new unit

Connection Type	G1/4 (Adaptable)
Temperature Range	32° TO 212° F
Maximum Pressure	145 psi
Wetted Parts Materials	316 SS and PTFE, EPDM Seal
Cell Constant	0.1
​Measurement Deviation	3% Typical/5% Max
​Available BNC Cable Lengths	8 ft or 16 ft

Salinity Monitor/Controller

Salinity Probe

Salinity Probe with NPT Adaptor